Jim

Results for 09/23 for fxi-beta.
Another awesome day!

Ron Thompson

Here are some of my BETA results.

I decided that if it wanted something a little more volatile, I'd try
the best think I know. Gold.

Attached is a days worth of gold.trading. Please _note_ at one point it
was trading 47 lots and going for 78 lots!!! all just to recover less
than 100$ on 0.1 lot initial loss.


Ron (ForexMT4.com)




Jim wrote:
>
> Results for 09/23 for fxi-beta.
> Another awesome day!
>
> .
>
>

Tihon

Hello Jim,
*
May I ask what setting do you use?
Thanks
Tim
*
*


--- On Tue, 9/23/08, Jim <tazmaan (AT) gmail (DOT) com> wrote:

From: Jim <tazmaan (AT) gmail (DOT) com>
Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Date: Tuesday, September 23, 2008, 4:03 PM







Results for 09/23 for fxi-beta.
Another awesome day!

Jim

Default settings on the three pairs I am running it on.
Didn't change a thing but to make sure the decimal setting was correct for my broker.

----- Original Message -----
From: Tihon
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Sent: Tuesday, September 23, 2008 7:32 PM
Subject: Re: [MT_E and I] FXI-Beta


Hello Jim,

May I ask what setting do you use?
Thanks
Tim




--- On Tue, 9/23/08, Jim <tazmaan (AT) gmail (DOT) com> wrote:

From: Jim <tazmaan (AT) gmail (DOT) com>
Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Date: Tuesday, September 23, 2008, 4:03 PM


Results for 09/23 for fxi-beta.
Another awesome day!

Tihon

Thank you Jim


--- On Tue, 9/23/08, Jim <tazmaan (AT) gmail (DOT) com> wrote:

From: Jim <tazmaan (AT) gmail (DOT) com>
Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Date: Tuesday, September 23, 2008, 10:15 PM







Default settings on the three pairs I am running it on.
Didn't change a thing but to make sure the decimal setting was correct for my broker.
*

----- Original Message -----
From: Tihon
To: MetaTrader_Experts_ and_Indicators@ yahoogroups. com
Sent: Tuesday, September 23, 2008 7:32 PM
Subject: Re: [MT_E and I] FXI-Beta








Hello Jim,
*
May I ask what setting do you use?
Thanks
Tim
*
*


--- On Tue, 9/23/08, Jim <tazmaan (AT) gmail (DOT) com> wrote:

From: Jim <tazmaan (AT) gmail (DOT) com>
Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_ and_Indicators@ yahoogroups. com
Date: Tuesday, September 23, 2008, 4:03 PM





Results for 09/23 for fxi-beta.
Another awesome day!

Jim

Attached today's result from fxi-beta. Slow day, +$294.00 profit.

----- Original Message -----
From: Empryean Software
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Sent: Thursday, September 18, 2008 3:39 AM
Subject: Re: [MT_E and I] FXI-Beta



fxi-beta statement after running for only 3 and half hours on one currency pair


On Thu, Sep 18, 2008 at 5:56 AM, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

ok, i think i need to go back and produce winxp version,
the issue is that my ea uses dll (c++ code) mainly for reading properties file and creating sessions and global variables.
this dll is called expertsample.dll you will find it in the experts\libraries folder, and it has 2 dependants, msvcr71.dll and msvcp71.dll these two files are copied into windows\system folder (only if you dont have them)..

i dont have a quick remedy except to say try copying these two dlls (msvcr71.dll and msvcp71.dll) into your experts\libraries folder and give it a try.



On Thu, Sep 18, 2008 at 9:41 PM, Shivanand <shivanund (AT) yahoo (DOT) com> wrote:


Yes windows XP here, is tehre something i need to change in EA or system setting?


Warm Regards

Shiva
http://www.nyfx.org
http://www.dubaitradeguide.com
http://www.tradeguide.cn

--- On Thu, 9/18/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>
Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com

Date: Thursday, September 18, 2008, 2:26 AM



r u also running winxp.
i had other people complaining abt fxi-beta on winxp.


On Thu, Sep 18, 2008 at 8:01 PM, Shivanand <shivanund (AT) yahoo (DOT) com> wrote:

Hi, I have tried to load the fxi beta like 10 times now, but everytime it crashes the terminal with an error message in a grey popup window "We are sorry for the crash"

What could be the reason?

Warm Regards

Shiva
http://www.nyfx. org
http://www.dubaitradeguide .com
http://www.tradeguide. cn


--- On Thu, 9/18/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>
Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_ and_Indicators@ yahoogroups.. com

Date: Thursday, September 18, 2008, 12:04 AM


Tested very well in backtest, i had to revise my hedging strategy it was emptying demo accounts in a matter of hours.
I can tell you this, this ea has potential as long as you have a reasonable amount and trade with the very lowest/minimum lot size.
attach it to a 5 min chart. dont use more than 4 pairs,
the best way is to identify a moving pair then run the ea against it, when the pair slows down find another one continue to identify fast moving pairs and rotate, keeping a maximum of 3 pairs.
minimum 1 (recommended) .





On Wed, Sep 17, 2008 at 10:53 PM, Vishal Ahuja <vishal563 (AT) yahoo (DOT) com> wrote:

There is no fixed value to say go-nogo and it will depend on the TF.

You can get an idea here http://www.andurilo nline.com/ Articles/ identifying- trends-with- bollingers. asp


Regards
Vishal


--- On Wed, 9/17/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>

Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_ and_Indicators@ yahoogroups. com
Date: Wednesday, September 17, 2008, 5:53 AM



ok what values indicate high volatility?


On Wed, Sep 17, 2008 at 6:49 PM, Vishal Ahuja <vishal563 (AT) yahoo (DOT) com> wrote:

A good indicator of volatility is the Bollinger Bandwidth ratio.
Indicator attached.

Regards
Vishal


--- On Wed, 9/17/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>
Subject: [MT_E and I] FXI-Beta
To: "metatrader_experts_ and_indicators" <metatrader_experts_ and_indicators@ yahoogroups. com>
Date: Wednesday, September 17, 2008, 2:25 AM


Ok,
Since all the base code is already there here is the new ea which should be tested as well.
Its FXI-Beta

What is FXI-Beta?
FXI-Beta is a scalping tool, yes it simply scalp the market and it has the decence of stop trading if the market is down.

In order for fxi-beta to be successful, it simply requires a market that will move at least 35 pips in whatever direction, if it is a ranging market moving up and down at least 35pips then this ea will harvest a lot of pips. If you know any tools that can tell the volatility of the market i will be interested.

How to install?
Simply download this fie and unzip it.
rename the .fxi file to .exe and install.
open chart (5 minute charts) and use the template fxi-beta.
wait for your account to grow, this is a demo ea only.
keep your takeprofit pips very low.

post your results, and any comments/suggestion s let chris or me know.

Serge Van Aelst

When you have SP2 SP3 on XP youhave to ake sure file protection is deactived.
Because any file that is copied in the system folder will be removed or disabled by Windows
as it thinks it is a virus or so.
There is a way that you can register he files so they will not be harmed or disabled by Windows
But that you have to lookup in the MDSN techzone of Microsoft.
Even whe the version of a fle chances windows will replace it again with the prevoios version.
Because all system files are stored in CAB files. Every now and then XP verifies if all files are still
exactly the same. If on has a different version number or file size it will replace the file with the one from the CAB
files.
This is really complex and since you are using an installer program you have to build in that procedure in to register
thes changed version if you copy them in the folder.

Because it is possible you install the program it works one hour and XP checked he files and it will not work anymore.
In SP! that did not excisted then it only excists since SP2 SP3.

Put this link in your browser, you see what I mean and it is complex to solve.
http://www.google.be/search?hl=nl&q=...otection&meta=



From: Jim
Sent: Wednesday, September 24, 2008 11:24 PM
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Subject: Re: [MT_E and I] FXI-Beta



Attached today's result from fxi-beta. Slow day, +$294.00 profit.

----- Original Message -----
From: Empryean Software
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Sent: Thursday, September 18, 2008 3:39 AM
Subject: Re: [MT_E and I] FXI-Beta



fxi-beta statement after running for only 3 and half hours on one currency pair


On Thu, Sep 18, 2008 at 5:56 AM, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

ok, i think i need to go back and produce winxp version,
the issue is that my ea uses dll (c++ code) mainly for reading properties file and creating sessions and global variables.
this dll is called expertsample.dll you will find it in the experts\libraries folder, and it has 2 dependants, msvcr71.dll and msvcp71.dll these two files are copied into windows\system folder (only if you dont have them)..

i dont have a quick remedy except to say try copying these two dlls (msvcr71.dll and msvcp71.dll) into your experts\libraries folder and give it a try.



On Thu, Sep 18, 2008 at 9:41 PM, Shivanand <shivanund (AT) yahoo (DOT) com> wrote:


Yes windows XP here, is tehre something i need to change in EA or system setting?


Warm Regards

Shiva
http://www.nyfx.org
http://www.dubaitradeguide.com
http://www.tradeguide.cn

--- On Thu, 9/18/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>
Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com

Date: Thursday, September 18, 2008, 2:26 AM



r u also running winxp.
i had other people complaining abt fxi-beta on winxp.


On Thu, Sep 18, 2008 at 8:01 PM, Shivanand <shivanund (AT) yahoo (DOT) com> wrote:

Hi, I have tried to load the fxi beta like 10 times now, but everytime it crashes the terminal with an error message in a grey popup window "We are sorry for the crash"

What could be the reason?

Warm Regards

Shiva
http://www.nyfx. org
http://www.dubaitradeguide .com
http://www.tradeguide. cn


--- On Thu, 9/18/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>
Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_ and_Indicators@ yahoogroups.. com

Date: Thursday, September 18, 2008, 12:04 AM


Tested very well in backtest, i had to revise my hedging strategy it was emptying demo accounts in a matter of hours.
I can tell you this, this ea has potential as long as you have a reasonable amount and trade with the very lowest/minimum lot size.
attach it to a 5 min chart. dont use more than 4 pairs,
the best way is to identify a moving pair then run the ea against it, when the pair slows down find another one continue to identify fast moving pairs and rotate, keeping a maximum of 3 pairs.
minimum 1 (recommended) .





On Wed, Sep 17, 2008 at 10:53 PM, Vishal Ahuja <vishal563 (AT) yahoo (DOT) com> wrote:

There is no fixed value to say go-nogo and it will depend on the TF.

You can get an idea here http://www.andurilo nline.com/ Articles/ identifying- trends-with- bollingers. asp


Regards
Vishal


--- On Wed, 9/17/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>

Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_ and_Indicators@ yahoogroups. com
Date: Wednesday, September 17, 2008, 5:53 AM



ok what values indicate high volatility?


On Wed, Sep 17, 2008 at 6:49 PM, Vishal Ahuja <vishal563 (AT) yahoo (DOT) com> wrote:

A good indicator of volatility is the Bollinger Bandwidth ratio.
Indicator attached.

Regards
Vishal


--- On Wed, 9/17/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>
Subject: [MT_E and I] FXI-Beta
To: "metatrader_experts_ and_indicators" <metatrader_experts_ and_indicators@ yahoogroups. com>
Date: Wednesday, September 17, 2008, 2:25 AM


Ok,
Since all the base code is already there here is the new ea which should be tested as well.
Its FXI-Beta

What is FXI-Beta?
FXI-Beta is a scalping tool, yes it simply scalp the market and it has the decence of stop trading if the market is down.

In order for fxi-beta to be successful, it simply requires a market that will move at least 35 pips in whatever direction, if it is a ranging market moving up and down at least 35pips then this ea will harvest a lot of pips. If you know any tools that can tell the volatility of the market i will be interested.

How to install?
Simply download this fie and unzip it.
rename the .fxi file to .exe and install.
open chart (5 minute charts) and use the template fxi-beta.
wait for your account to grow, this is a demo ea only.
keep your takeprofit pips very low.

post your results, and any comments/suggestion s let chris or me know.

Jim

Good thing I have xp sp3 and it's worked flawlessly from the start.
Guess I am lucky.

----- Original Message -----
From: Serge Van Aelst
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Sent: Wednesday, September 24, 2008 3:22 PM
Subject: Re: [MT_E and I] FXI-Beta



When you have SP2 SP3 on XP youhave to ake sure file protection is deactived.
Because any file that is copied in the system folder will be removed or disabled by Windows
as it thinks it is a virus or so.
There is a way that you can register he files so they will not be harmed or disabled by Windows
But that you have to lookup in the MDSN techzone of Microsoft.
Even whe the version of a fle chances windows will replace it again with the prevoios version.
Because all system files are stored in CAB files. Every now and then XP verifies if all files are still
exactly the same. If on has a different version number or file size it will replace the file with the one from the CAB
files.
This is really complex and since you are using an installer program you have to build in that procedure in to register
thes changed version if you copy them in the folder.

Because it is possible you install the program it works one hour and XP checked he files and it will not work anymore.
In SP! that did not excisted then it only excists since SP2 SP3.

Put this link in your browser, you see what I mean and it is complex to solve.
http://www.google.be/search?hl=nl&q=...otection&meta=



From: Jim
Sent: Wednesday, September 24, 2008 11:24 PM
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Subject: Re: [MT_E and I] FXI-Beta



Attached today's result from fxi-beta. Slow day, +$294.00 profit.

----- Original Message -----
From: Empryean Software
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Sent: Thursday, September 18, 2008 3:39 AM
Subject: Re: [MT_E and I] FXI-Beta



fxi-beta statement after running for only 3 and half hours on one currency pair


On Thu, Sep 18, 2008 at 5:56 AM, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

ok, i think i need to go back and produce winxp version,
the issue is that my ea uses dll (c++ code) mainly for reading properties file and creating sessions and global variables.
this dll is called expertsample.dll you will find it in the experts\libraries folder, and it has 2 dependants, msvcr71.dll and msvcp71.dll these two files are copied into windows\system folder (only if you dont have them).

i dont have a quick remedy except to say try copying these two dlls (msvcr71.dll and msvcp71.dll) into your experts\libraries folder and give it a try.



On Thu, Sep 18, 2008 at 9:41 PM, Shivanand <shivanund (AT) yahoo (DOT) com> wrote:


Yes windows XP here, is tehre something i need to change in EA or system setting?


Warm Regards

Shiva
http://www.nyfx.org
http://www.dubaitradeguide.com
http://www.tradeguide.cn

--- On Thu, 9/18/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>
Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com

Date: Thursday, September 18, 2008, 2:26 AM



r u also running winxp.
i had other people complaining abt fxi-beta on winxp.


On Thu, Sep 18, 2008 at 8:01 PM, Shivanand <shivanund (AT) yahoo (DOT) . com> wrote:

Hi, I have tried to load the fxi beta like 10 times now, but everytime it crashes the terminal with an error message in a grey popup window "We are sorry for the crash"

What could be the reason?

Warm Regards

Shiva
http://www.nyfx. org
http://www.dubaitradeguide .com
http://www.tradeguide. cn


--- On Thu, 9/18/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>
Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_ and_Indicators@ yahoogroups. com

Date: Thursday, September 18, 2008, 12:04 AM


Tested very well in backtest, i had to revise my hedging strategy it was emptying demo accounts in a matter of hours.
I can tell you this, this ea has potential as long as you have a reasonable amount and trade with the very lowest/minimum lot size.
attach it to a 5 min chart. dont use more than 4 pairs,
the best way is to identify a moving pair then run the ea against it, when the pair slows down find another one continue to identify fast moving pairs and rotate, keeping a maximum of 3 pairs.
minimum 1 (recommended) .





On Wed, Sep 17, 2008 at 10:53 PM, Vishal Ahuja <vishal563 (AT) yahoo (DOT) com> wrote:

There is no fixed value to say go-nogo and it will depend on the TF.

You can get an idea here http://www.andurilo nline.com/ Articles/ identifying- trends-with- bollingers. asp


Regards
Vishal


--- On Wed, 9/17/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>

Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_ and_Indicators@ yahoogroups. com
Date: Wednesday, September 17, 2008, 5:53 AM



ok what values indicate high volatility?


On Wed, Sep 17, 2008 at 6:49 PM, Vishal Ahuja <vishal563 (AT) yahoo (DOT) com> wrote:

A good indicator of volatility is the Bollinger Bandwidth ratio.
Indicator attached.

Regards
Vishal


--- On Wed, 9/17/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>
Subject: [MT_E and I] FXI-Beta
To: "metatrader_experts_ and_indicators" <metatrader_experts_ and_indicators@ yahoogroups. com>
Date: Wednesday, September 17, 2008, 2:25 AM


Ok,
Since all the base code is already there here is the new ea which should be tested as well.
Its FXI-Beta

What is FXI-Beta?
FXI-Beta is a scalping tool, yes it simply scalp the market and it has the decence of stop trading if the market is down.

In order for fxi-beta to be successful, it simply requires a market that will move at least 35 pips in whatever direction, if it is a ranging market moving up and down at least 35pips then this ea will harvest a lot of pips. If you know any tools that can tell the volatility of the market i will be interested.

How to install?
Simply download this fie and unzip it.
rename the .fxi file to .exe and install.
open chart (5 minute charts) and use the template fxi-beta.
wait for your account to grow, this is a demo ea only.
keep your takeprofit pips very low.

post your results, and any comments/suggestion s let chris or me know.

Serge Van Aelst

Depends on the file activation/protection system....
If it is switched on its very good for virus protection.
But I presume you don't have Windows defender running then?


From: Jim
Sent: Thursday, September 25, 2008 3:15 AM
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Subject: Re: [MT_E and I] FXI-Beta



Good thing I have xp sp3 and it's worked flawlessly from the start.
Guess I am lucky.

----- Original Message -----
From: Serge Van Aelst
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Sent: Wednesday, September 24, 2008 3:22 PM
Subject: Re: [MT_E and I] FXI-Beta



When you have SP2 SP3 on XP youhave to ake sure file protection is deactived.
Because any file that is copied in the system folder will be removed or disabled by Windows
as it thinks it is a virus or so.
There is a way that you can register he files so they will not be harmed or disabled by Windows
But that you have to lookup in the MDSN techzone of Microsoft.
Even whe the version of a fle chances windows will replace it again with the prevoios version.
Because all system files are stored in CAB files. Every now and then XP verifies if all files are still
exactly the same. If on has a different version number or file size it will replace the file with the one from the CAB
files.
This is really complex and since you are using an installer program you have to build in that procedure in to register
thes changed version if you copy them in the folder.

Because it is possible you install the program it works one hour and XP checked he files and it will not work anymore.
In SP! that did not excisted then it only excists since SP2 SP3.

Put this link in your browser, you see what I mean and it is complex to solve.
http://www.google.be/search?hl=nl&q=...otection&meta=



From: Jim
Sent: Wednesday, September 24, 2008 11:24 PM
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Subject: Re: [MT_E and I] FXI-Beta



Attached today's result from fxi-beta. Slow day, +$294.00 profit.

----- Original Message -----
From: Empryean Software
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Sent: Thursday, September 18, 2008 3:39 AM
Subject: Re: [MT_E and I] FXI-Beta



fxi-beta statement after running for only 3 and half hours on one currency pair


On Thu, Sep 18, 2008 at 5:56 AM, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

ok, i think i need to go back and produce winxp version,
the issue is that my ea uses dll (c++ code) mainly for reading properties file and creating sessions and global variables.
this dll is called expertsample.dll you will find it in the experts\libraries folder, and it has 2 dependants, msvcr71.dll and msvcp71.dll these two files are copied into windows\system folder (only if you dont have them).

i dont have a quick remedy except to say try copying these two dlls (msvcr71.dll and msvcp71.dll) into your experts\libraries folder and give it a try.



On Thu, Sep 18, 2008 at 9:41 PM, Shivanand <shivanund (AT) yahoo (DOT) com> wrote:


Yes windows XP here, is tehre something i need to change in EA or system setting?


Warm Regards

Shiva
http://www.nyfx.org
http://www.dubaitradeguide.com
http://www.tradeguide.cn

--- On Thu, 9/18/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>
Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com

Date: Thursday, September 18, 2008, 2:26 AM



r u also running winxp.
i had other people complaining abt fxi-beta on winxp.


On Thu, Sep 18, 2008 at 8:01 PM, Shivanand <shivanund (AT) yahoo (DOT) . com> wrote:

Hi, I have tried to load the fxi beta like 10 times now, but everytime it crashes the terminal with an error message in a grey popup window "We are sorry for the crash"

What could be the reason?

Warm Regards

Shiva
http://www.nyfx. org
http://www.dubaitradeguide .com
http://www.tradeguide. cn


--- On Thu, 9/18/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>
Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_ and_Indicators@ yahoogroups. com

Date: Thursday, September 18, 2008, 12:04 AM


Tested very well in backtest, i had to revise my hedging strategy it was emptying demo accounts in a matter of hours.
I can tell you this, this ea has potential as long as you have a reasonable amount and trade with the very lowest/minimum lot size.
attach it to a 5 min chart. dont use more than 4 pairs,
the best way is to identify a moving pair then run the ea against it, when the pair slows down find another one continue to identify fast moving pairs and rotate, keeping a maximum of 3 pairs.
minimum 1 (recommended) .





On Wed, Sep 17, 2008 at 10:53 PM, Vishal Ahuja <vishal563 (AT) yahoo (DOT) com> wrote:

There is no fixed value to say go-nogo and it will depend on the TF.

You can get an idea here http://www.andurilo nline.com/ Articles/ identifying- trends-with- bollingers. asp


Regards
Vishal


--- On Wed, 9/17/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>

Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_ and_Indicators@ yahoogroups. com
Date: Wednesday, September 17, 2008, 5:53 AM



ok what values indicate high volatility?


On Wed, Sep 17, 2008 at 6:49 PM, Vishal Ahuja <vishal563 (AT) yahoo (DOT) com> wrote:

A good indicator of volatility is the Bollinger Bandwidth ratio.
Indicator attached.

Regards
Vishal


--- On Wed, 9/17/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>
Subject: [MT_E and I] FXI-Beta
To: "metatrader_experts_ and_indicators" <metatrader_experts_ and_indicators@ yahoogroups. com>
Date: Wednesday, September 17, 2008, 2:25 AM


Ok,
Since all the base code is already there here is the new ea which should be tested as well.
Its FXI-Beta

What is FXI-Beta?
FXI-Beta is a scalping tool, yes it simply scalp the market and it has the decence of stop trading if the market is down.

In order for fxi-beta to be successful, it simply requires a market that will move at least 35 pips in whatever direction, if it is a ranging market moving up and down at least 35pips then this ea will harvest a lot of pips. If you know any tools that can tell the volatility of the market i will be interested.

How to install?
Simply download this fie and unzip it.
rename the .fxi file to .exe and install.
open chart (5 minute charts) and use the template fxi-beta.
wait for your account to grow, this is a demo ea only.
keep your takeprofit pips very low.

post your results, and any comments/suggestion s let chris or me know.

Jim

No I do not have defender running, and actually I am not sure i have even seen it other than on my wife's laptop running vista.
Maybe you were talking about vista instead of xp?

----- Original Message -----
From: Serge Van Aelst
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Sent: Wednesday, September 24, 2008 6:26 PM
Subject: Re: [MT_E and I] FXI-Beta



Depends on the file activation/protection system....
If it is switched on its very good for virus protection.
But I presume you don't have Windows defender running then?


From: Jim
Sent: Thursday, September 25, 2008 3:15 AM
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Subject: Re: [MT_E and I] FXI-Beta



Good thing I have xp sp3 and it's worked flawlessly from the start.
Guess I am lucky.

----- Original Message -----
From: Serge Van Aelst
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Sent: Wednesday, September 24, 2008 3:22 PM
Subject: Re: [MT_E and I] FXI-Beta



When you have SP2 SP3 on XP youhave to ake sure file protection is deactived.
Because any file that is copied in the system folder will be removed or disabled by Windows
as it thinks it is a virus or so.
There is a way that you can register he files so they will not be harmed or disabled by Windows
But that you have to lookup in the MDSN techzone of Microsoft.
Even whe the version of a fle chances windows will replace it again with the prevoios version.
Because all system files are stored in CAB files. Every now and then XP verifies if all files are still
exactly the same. If on has a different version number or file size it will replace the file with the one from the CAB
files.
This is really complex and since you are using an installer program you have to build in that procedure in to register
thes changed version if you copy them in the folder.

Because it is possible you install the program it works one hour and XP checked he files and it will not work anymore.
In SP! that did not excisted then it only excists since SP2 SP3.

Put this link in your browser, you see what I mean and it is complex to solve.
http://www.google.be/search?hl=nl&q=...otection&meta=



From: Jim
Sent: Wednesday, September 24, 2008 11:24 PM
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Subject: Re: [MT_E and I] FXI-Beta



Attached today's result from fxi-beta. Slow day, +$294.00 profit.

----- Original Message -----
From: Empryean Software
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com
Sent: Thursday, September 18, 2008 3:39 AM
Subject: Re: [MT_E and I] FXI-Beta



fxi-beta statement after running for only 3 and half hours on one currency pair


On Thu, Sep 18, 2008 at 5:56 AM, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

ok, i think i need to go back and produce winxp version,
the issue is that my ea uses dll (c++ code) mainly for reading properties file and creating sessions and global variables.
this dll is called expertsample.dll you will find it in the experts\libraries folder, and it has 2 dependants, msvcr71.dll and msvcp71.dll these two files are copied into windows\system folder (only if you dont have them).

i dont have a quick remedy except to say try copying these two dlls (msvcr71.dll and msvcp71.dll) into your experts\libraries folder and give it a try.



On Thu, Sep 18, 2008 at 9:41 PM, Shivanand <shivanund (AT) yahoo (DOT) com> wrote:


Yes windows XP here, is tehre something i need to change in EA or system setting?


Warm Regards

Shiva
http://www.nyfx.org
http://www.dubaitradeguide.com
http://www.tradeguide.cn

--- On Thu, 9/18/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>
Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_and_Indicators (A...oups (DOT) com

Date: Thursday, September 18, 2008, 2:26 AM



r u also running winxp.
i had other people complaining abt fxi-beta on winxp.


On Thu, Sep 18, 2008 at 8:01 PM, Shivanand <shivanund (AT) yahoo (DOT) com> wrote:

Hi, I have tried to load the fxi beta like 10 times now, but everytime it crashes the terminal with an error message in a grey popup window "We are sorry for the crash"

What could be the reason?

Warm Regards

Shiva
http://www.nyfx. org
http://www.dubaitradeguide .com
http://www.tradeguide. cn


--- On Thu, 9/18/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>
Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_ and_Indicators@ yahoogroups. com

Date: Thursday, September 18, 2008, 12:04 AM


Tested very well in backtest, i had to revise my hedging strategy it was emptying demo accounts in a matter of hours.
I can tell you this, this ea has potential as long as you have a reasonable amount and trade with the very lowest/minimum lot size.
attach it to a 5 min chart. dont use more than 4 pairs,
the best way is to identify a moving pair then run the ea against it, when the pair slows down find another one continue to identify fast moving pairs and rotate, keeping a maximum of 3 pairs.
minimum 1 (recommended) .





On Wed, Sep 17, 2008 at 10:53 PM, Vishal Ahuja <vishal563 (AT) yahoo (DOT) com> wrote:

There is no fixed value to say go-nogo and it will depend on the TF.

You can get an idea here http://www.andurilo nline.com/ Articles/ identifying- trends-with- bollingers. asp


Regards
Vishal


--- On Wed, 9/17/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>

Subject: Re: [MT_E and I] FXI-Beta
To: MetaTrader_Experts_ and_Indicators@ yahoogroups. com
Date: Wednesday, September 17, 2008, 5:53 AM



ok what values indicate high volatility?


On Wed, Sep 17, 2008 at 6:49 PM, Vishal Ahuja <vishal563 (AT) yahoo (DOT) com> wrote:

A good indicator of volatility is the Bollinger Bandwidth ratio.
Indicator attached.

Regards
Vishal


--- On Wed, 9/17/08, Empryean Software <empryean (AT) gmail (DOT) com> wrote:

From: Empryean Software <empryean (AT) gmail (DOT) com>
Subject: [MT_E and I] FXI-Beta
To: "metatrader_experts_ and_indicators" <metatrader_experts_ and_indicators@ yahoogroups. com>
Date: Wednesday, September 17, 2008, 2:25 AM


Ok,
Since all the base code is already there here is the new ea which should be tested as well.
Its FXI-Beta

What is FXI-Beta?
FXI-Beta is a scalping tool, yes it simply scalp the market and it has the decence of stop trading if the market is down.

In order for fxi-beta to be successful, it simply requires a market that will move at least 35 pips in whatever direction, if it is a ranging market moving up and down at least 35pips then this ea will harvest a lot of pips. If you know any tools that can tell the volatility of the market i will be interested.

How to install?
Simply download this fie and unzip it.
rename the .fxi file to .exe and install.
open chart (5 minute charts) and use the template fxi-beta.
wait for your account to grow, this is a demo ea only.
keep your takeprofit pips very low.

post your results, and any comments/suggestion s let chris or me know.